- stone
- bricks
- plaster
- roof tiles
- exposed concrete
- tile joints
- marble
- tiles
After their impregnation with DOMOGARD 1100, the surfaces are protected from rain and humidity, becoming hydrophobic.
DOMOGARD 1100
Hydrophobic impregnation. DOMOGARD 1100 is a single component hydrophobic impregnating material applied on inorganic substrates.
It complies with EN 12390-8 (replacing DIN 1048).
Download PDF
Use
Instructions
Useful Data
Protective Coatings – Floor Treatments & Toppings
DOMOGARD 1100 is used for the impregnation of inorganic surfaces such as:
- stone
- bricks
- plaster
- roof tiles
- exposed concrete
- tile joints
- marble
- tiles
After their impregnation with DOMOGARD 1100, the surfaces are protected from rain and humidity, becoming hydrophobic.
Advantages
- Very strong hydrophobic effect
- Permeable to vapors, allowing the surface to breathe
- Resistant to rain on both horizontal and perpendicular surfaces
- Can be painted
- Does not alter the appearance of the surface
- Suitable for both alkaline and non-alkaline substrates
- Can be applied to slightly damp substrates
- Keeps surfaces clean
It can be applied by brush, roll or spray, on clean surfaces.
Application temperature
from 5° to 40°C.
Dosage
From 0.15 to 0.25 kg/m² per layer according to substrate. It can be applied in 1 or 2 layers. Immediately applied the second layer. On very low porosity surfaces (such as polished stone, marble, tiles, roof tiles) dilute up to 1:4 with water and apply 1 layer only. Clean tools with water right after use.
Shelf life
At least 6 months in the original sealed containers.
Packaging
Drums of 200 kg. Containers of 20 kg and 5 kg.
